Industrial Dehumidifier Hire

Industrial Desiccant Dehumidifiers RL

  • Stainless steel 304 unit design as standard with 316 stainless steel available as an option.
  • Heat recovery as standard on all RL units
  • Easily maintainable with front access required only for all hardware access
  • Industry leading efficiency and greatest kg/hr moisture removal per kWh on market
  • Hire unit frame for ease of handling on site
  • Externally located switches and resets to remove need to open control panel for any safety trips.

Data Sheet(s) Enquire Now

Product Specification

Mid-range industrial desiccant dehumidifiers for dry air storage, cold stores, sports halls, museums, clean rooms, pneumatic conveying and process air conditioning systems.

Manufactured in stainless steel these units include internal heat recovery, electric reactivation and Auto/Manual mode switching.

Pre-wired for for two 2 step binary control (from EH4 2 step controller) as standard, units are also available for linear capacity control (from EH3 PI controller or BMS control signal).

The R Series is supplied with the high capacity D-Max ceramic-silica gel rotor, G7 panel filters, reactivation heater, process and reactivation fans and all essential controls. Also available with steam & gas reactivation.

  • NR-DH30
  • NR-DH31
  • NR-DH61
  • NR-DH71
  • Fully Stainless Steel 304 unit construction
  • Separate process and reactivation airflow to isolate application environment from fresh air loads.
  • IP55 as standard for external use
  • F7 Grade filtration as standard
  • Heaters available in Electric, Steam and Gas
  • Heat recovery as standard on all RL units
  • Stainless steel frame including wheels and forklift channels
  • External lockable heater switch for capacity control and restriction (safety feature)
  • Externally located manual reset switches to prevent users for needing access into control panel
  • Multi-vane dampers provided on outlets as standard to allow easy airflow modification on site
  • Dual fan configuration to separate fresh air from process air and minimize moisture load on application.
  • High efficiency fans to minimize running costs and heat gain as well as maximizing efficiency.
  • High efficiency AC fans to minimize running costs and heat gain as well as maximizing efficiency.
  • Market leading desiccant rotor technology provided by the Seibu Giken group.
  • D-MAX rotor technology as standard on all units.
  • High efficiency honeycomb structure design for maximum moisture transfer and minimum pressure drop.
  • Fully washable rotor allows efficiency and moisture transfer to be retained over the service life of the dehumidifier.
  • Minimum of 10 years’ service life of rotor with proper maintenance schedule.
  • 400V/3ph/50Hz as standard
  • Options for all overseas voltage and frequencies to suit overseas markets and installations
  • Linear heater control option available for accurate moisture removal
  • IP55 as standard for external use
  • Internal control panel with all switches and breakers for standalone or integrated operation.
  • EH4
  • EH3 (Modbus BMS integration available)
  • C4 Touchscreen (Modbus BMS integration available)

Similar Products in the Range

Industrial Desiccant Dehumidifiers DC

Industrial Desiccant Dehumidifiers DC
  • Stainless steel 304 unit design as standard.
  • Industry leading efficiency and greatest kg/hr moisture removal per kWh on market.
  • Compact design for easy application and integration.

Find Out more Enquire

Industrial Desiccant Dehumidifer Flexisorb

Industrial Desiccant Dehumidification Systems
  • Developed to meet the varying needs of the process industry, the Flexisorb range offers a series of custom-built compact industrial dehumidification systems.
  • Designed around our desiccant rotor, units are configured as either ‘Recusorb’ or ‘Consorb’ principle, depending on the application.
  • Dewpoints as low as minus 60°C can now be achieved in a single pass.

Find Out more Enquire

Industrial Desiccant Dehumidifier RLZ & CZ

Industrial Desiccant Dehumidifier RLZ & CZ
  • Industrial dehumidifier using desiccant technology for chemical, pharmaceutical and food manufacturing processes, large warehouses, cold stores, ice rinks and sports halls.
  • Manufactured in Aluzinc, Recusorb RLZ units include internal heat recovery as standard. Consorb CZ Series are particularly suitable for deep drying applications.Units are available with electric, steam, direct fired gas or hot water reactivation heaters.
  • As standard, all RLZ & CZ dehumidifiers are supplied with G4 air inlet filters, process and reactivation fans, reactivation heater, D-Max desiccant rotor, electric control panel and PLC C2 with fully integrated capacity control system.

Find Out more Enquire

Why Choose Newsome for Your Dehumidifer Hire Needs

  • Newsome specialises in the hire of industrial dehumidifiers with greater capacity and rates of moisture removal for larger drying tasks.
  • We provide long and short-term hire options, to fit with your forward planning or short-term emergency drying needs.
  • We take pride in offering a wide range of industrial dehumidifier solutions tailored to suit the unique requirements of each industry sector.
  • Choose Newsome for nationwide dehumidifier hire and rental solutions that are backed by a team of experts and a commitment to delivering exceptional service.

Where we cover

Here at Newsome, we provide for hire across the UK supported by our nationwide sales, maintenance, and support teams. Our headquarters are based in Elland, West Yorkshire close to Huddersfield, Wakefield, Halifax, and Bradford and midway between Manchester and Leeds. From here, we have easy access to all the major towns and cities across the north of England including Burnley, Blackburn, Preston, Blackpool, and Lancaster in Lancashire as well as Sheffield, York, Hull, and Doncaster in Yorkshire. We have a large number of clients based in the industrial cities and towns in the North West and Wirral including Liverpool, Warrington, Wigan, and Bolton.

Our sales office in Wallsend supports clients in the North East including Newcastle, Sunderland and Middlesborough with access to Carlisle and up to Scotland including the major industrial areas of Glasgow and Edinburgh.

Cities in the Midlands including Stoke, Coventry, Leicester, Burton, Derby, Nottingham, Wolverhampton, and Northampton and across to Peterborough are all supported by our sales and maintenance teams working from our division in Birmingham.

Clients in the South and South West of England including those in Bristol, Reading, Milton Keynes, Swindon, Oxford, Luton, and Cambridge are all looked after by our South of England support team.

So, from Glasgow and Edinburgh in Scotland to Carlisle, Barrow, Workington, and Whitehaven in Cumbria and down to Bristol and Cardiff and across to Ipswich, if you are looking to hire a in the UK, then speak to us here at Newsome first for the best equipment, best service, and best rental value.

Our Dehumidifier Hire

Here at Newsome, we understand that seamless and reliable equipment is vital to your operations. That’s why our dehumidifier hire solutions are tailored to meet your specific needs ensuring you have access to reliable and efficient equipment for your projects or emergency situations.

Contact us today for up-to-date rental availability; hire from the industry experts and get the right drying solution you need right now.

Get in touch with our experts

01422 371711 Enquire

Datasheet(s)

NR-DH30 Dehumidifier

NR-DH31 Dehumidifier

NR-DH61 Dehumidifier

NR-DH71 Dehumidifier